Description
Disinfectant
Composition
Each unit contains:
-
Alkyl dimethyl amine oxide (detergent): 75.5 mg
-
Alcohol ethoxylate: 75.5 mg
-
Phosphoric acid: 0.078 mg
-
Nanosil (disinfectant): 150 mg
Indications
NanoClean can be used for cleaning and disinfection of all types of surfaces (plastic, metal, glass, ceramic, porcelain, steel), as well as for cleaning and disinfecting all piping and water transfer systems in livestock, poultry, aquaculture industries, and slaughterhouses.
-
Various surfaces in poultry houses, slaughterhouses, and processing facilities
-
Equipment inside poultry houses and slaughterhouses
-
Transport vehicles and poultry cages
Dosage and Method of Use
-
Heavily contaminated surfaces (end of production cycle in poultry farms, after litter removal, especially following diseases with high mortality and contagion): dilute 1:10 with water.
-
Dirty and contaminated surfaces after cleaning and washing with cold water: dilute 6:100 with water.
-
Lightly contaminated surfaces after cleaning and washing with warm water: dilute 5:100 with water.
Note: After preparing the above dilutions, pour the solution into a sprayer and apply at a pressure of approximately 800–1000 PSI, using about 0.5 liters per square meter. After at least 60 minutes, rinse the treated surface with water.
Use of foam lances is recommended.
Precautions
Due to the presence of detergent compounds in NanoClean, do not use it for disinfecting drinking water or foodstuffs. When handling the concentrated solution, always wear gloves. In case of skin contact, immediately wash with plenty of lukewarm water.
If the solution comes into contact with eyes, rinse immediately with plenty of lukewarm water and seek medical attention. In case of accidental ingestion, give plenty of lukewarm water to the person, do not induce vomiting, and seek medical attention immediately.
